CFG – Chemicals Maintenance – General Catalog 2024 low-res

Overview
This general catalog groups maintenance chemicals for cleaning, lubrication, bonding, sealing and protection. It enables quick selection by substrate, duty and environment while aligning with plant safety and compliance.

Product scope

• Cleaners/degreasers: solvent and water‑based families; key parameters include evaporation rate, flashpoint and residue control.
• Lubricants: penetrating fluids, dry films, PTFE and lithium greases, mineral and synthetic oils with viscosity selection charts.
• Bonding/sealing: cyanoacrylates, anaerobic threadlockers, MS polymer and RTV silicones with cure profiles and gap‑fill ranges.
• Protection: anti‑seize, corrosion inhibitors, zinc‑rich coatings and electrical contact care.

Selection criteria

• Define temperature, load and speed; pick base chemistry accordingly.
• Check substrate compatibility (aluminum, galvanized steel, elastomers, PC/PMMA) to avoid stress‑cracking.
• Consider VOC constraints and ventilation; protect nearby sensors and belts during application.

Application notes

• Surface prep: degrease, lightly abrade if needed, respect dew‑point separation prior to sealing/coating.
• Use calibrated applicators for threadlockers; respect torque and fixture/full‑cure times.
• Document re‑application intervals; store aerosols temperature‑controlled, away from ignition sources.

Reliability & safety

• Trend noise, stick‑slip and corrosion bloom vs. chemistry and application method.
• Maintain SDS access and PPE guidance; segregate industrial from food‑grade products.