How to arrange, size and specify bearings on belt-driven industrial fans: locating and floating sides, clearance for hot gas, and the real load from an overhung pulley.
Paper Machine Dryer Section Bearings: Heat, C3 vs C4 Clearance and Circulating Oil
Why dryer cylinder bearings on paper machines run hot, when C4 clearance beats C3, how the locating and floating sides work and what circulating oil must achieve.
Screw Compressor Bearings: Angular Contact Pairs, Cylindrical Rollers and the Thrust Problem
Why screw compressors use cylindrical roller bearings for radial loads and angular contact sets for thrust, and how preload, oil and arrangement decide airend life.
Bearings for Mining Conveyors and Crushers: Sealing Out Abrasive Dust and Shock Loads
How to protect bearings in mining conveyors, idlers and crushers from abrasive dust and impact: seal design, grease purging, clearance and static safety.
Split Plummer Block Housings for Spherical Roller Bearings: Sizing, Sealing and Locating vs Non-Locating
How to size split plummer block housings for spherical roller bearings, choose seals for the environment and set up locating and non-locating positions.
Double Row Deep Groove Ball Bearings (4200 and 4300 Series): When One Wider Bearing Beats Two Single Rows
4200 and 4300 double row deep groove ball bearings add radial capacity in the same envelope as 6200 and 6300. When they beat two single rows and when they fail.
Spherical plain bearings and rod ends: selecting for radial, angular and combined load
How to select spherical plain bearings and rod ends by load direction, sliding material and oscillating motion, with load ratings, sliding velocity and tilt angle explained for hydraulic, construction and agricultural linkages.
Plain Bronze Bushes vs Composite PTFE Bushings: Load, Speed and Maintenance Trade-offs
Sintered bronze, solid bronze, wrapped bronze, PTFE and POM composite bushes each suit a different mix of load, sliding speed and maintenance. Here is how to choose the right one without guesswork.
Loose Needle Rollers and Needle Roller Inner Rings: Building Custom Bearing Arrangements
How to build reliable custom bearing positions with loose needle rollers and IR inner rings: raceway hardness, needle gauge classes, end play, assembly with grease and typical gearbox and pump applications.
Pillow blocks and flange units: cast housing, pressed steel and choosing the insert
Housing material, locking method and sealing tier decide whether a housed unit lasts a decade or a season. How to specify against the failure you actually have.









